Hi,
I live in an appartement. The internet and TV signal is attached via cable.
Unfortunatelly I see a lot of pixel issues / artefacts in TV signal once MoCa network is running.
Any help for that?
I use 2x goCoax MA2500D and the official SP-2 splitter and the PoE filter from the same package.
Below you can see my installation path:
The internet modem/router (AVM Cable 6600) uses DOCSIS3.1. Due to that I have installed the recommended PoE filter based on the description from here:
Every 1-2 seconds I see artefacts in TV signal. It is somehow matched to the traffic ethernet LED on the goCoax device.
Best Regards
Did another check.
Enabling Ext-Band was possible if I have reduced the Tx rate from 10 to 8 on the adapter near the TV.
Unfortunately the network speed was much lower (avg. 50 mbit/s).
So far disabled ext Band with full Tx rate is the best solution and provides avg. 550 mbit/s.